Technest

Door Access Control by Fingerprint & Biometric Time Attendance Machine

د.إ399.00

  • Fingerprint reader with durable and highly accurate ZK optical sensor
  • Touch a-second user recognition
  • Stores 1,500 templates
  • There are 5,000 cards and 30,000 transactions
  • Reads Fingerprint and/or Card
  • Optional integrated smart card reader
  • Built-in Serial and Ethernet ports
  • Tamper-proofs switch and alarm outputs

 Installation & Configuration Services Available

About this item

The SF300 is an IP based fingerprint terminal, which operate in both network mode and standalone mode. it can connect with ZKAccess3.5 software for access control and time attendance management.

Wiegand output makes SF300 flexible to connect with ZKTeco or any 3rd party controllers as a slave reader, Additionally, wiegand input allows two units of SF300 to configure with each other and utilize Master & Slave solution, which requires user verification at both entrance and exit. Meanwhile, anti-passback function can be used to maximize the security.

Auxiliary input interface allows SF300 to connect with an external source, for instance, a smoke detector or emergency switch. Once the linkage function is enabled through the machine menu, the device would generate an alarm signal and open the door in case of emergency.

DOOR ACCESS CONTROL BY FINGERPRINT & BIOMETRIC TIME ATTENDANCE MACHINE

Technest Security Systems offers high-quality fingerprint access control biometric time attendance from the best brand.

We provide a variety of fingerprint access control biometric time attendance machine options based on your budget and needs.

  • Fingerprint scanner with a long-lasting and highly accurate ZK optical sensor
  • Touch-a-second user identification
  • 5,000 cards and 30,000 transactions are involved
  • 1,500 templates are stored.
  • Fingerprint and/or Card reader
  • Smart card reader integrated as an option
  • Serial and Ethernet ports are built in.
  • Switch and alarm outputs are tamper-proofed

Description and features of this product:

  • The SF300 is an IP-based fingerprint terminal that can be used in network or standalone mode. It can beconnected with the ZKAccess3.5 software, which is used for access control and time attendance management.So, basically this biometric time attendance machine is equipped with the fastest commercial-based fingerprint matching algorithm and a ZK high-performance, high-image quality optical fingerprint sensor. The device can be installed independently or in conjunction with any third-party panel that supports 26-bit WG.
  • The Wiegand output allows the SF300 to function as a slave reader with ZKTeco or any third-party controller. Furthermore, wiegand input enables two SF300 units to be configured with each other and use the Master & Slave solution, which necessitates user verification at both the entrance and exit. In the meantime, the anti-passback function can be used to increase security.
  • The auxiliary input interface allows the SF300 to communicate with an external source, such as a smoke detector or an emergency switch. If the linkage function is enabled in the machine menu, the device will generate an alarm and open the door in the event of an emergency.
  • This fingerprint biometric time attendance machine does not require a computer. Keypads and enrooted firmware allow for complete setup and programming. A 3.5-inch TFT display which comes with a graphical user interface offers a rich user experience. Acceptance and rejection of valid/invalid fingerprints are indicated audibly and visually.
  • The performance of this biometric machine is dependable, long-lasting and the highly accurate ZK fingerprint sensor comes with the ver10 algorithm which provides user recognition in less than 1.5 seconds.
  • Integrated Full Access Control- Relay Outputs for an electric lock and an alarm. Inputs for the door status sensor and the exit switch. For programming valid entry zones, it supports multiple time zones and personnel groups. When the tamper switch is activated, the alarm will be triggered.
  • WG output for connecting to the access control panel, as well as an Ethernet port for fast and dependable computer communication.

 

Fingerprint biometrics can be used to gain physical and logical access to company buildings as well as internal resources such as enterprise computers and systems. There is no possibility of fraud because any transaction carried out by an individual is precisely and securely linked to the correct individual. As a result, fingerprint biometrics boosts trust in the identity verification process and promotes user accountability.

Technest.aespecialises in biometric installation services that are adaptable and simple to integrate. Our excellent biometric installation services and solutions have been thoroughly tested. For specific industries, we customise versatile technology, software, and applications. We use precise installation and configuration of your biometric system. We develop high-quality biometric systems that offer a variety of behavioural options based on the type of enterprise, usage, and necessity.

Technest.aespecialises in adaptable and simple-to-integrate biometric installation services. Our excellent biometric installation services and solutions have undergone extensive testing. We tailor versatile technology, software, and applications to specific industries. We install and configure your biometric system precisely. We create high-quality biometric systems that provide a range of behavioural options based on the type of business, usage, and requirement.

Reviews

There are no reviews yet.

Be the first to review “Door Access Control by Fingerprint & Biometric Time Attendance Machine”

Your email address will not be published. Required fields are marked *

×

Hello!

Click one of our representatives below to chat on WhatsApp or send us an email to support@technest.ae

× How can I help you?